|
The deck is on and you'll notice some dark spots on it. This is 410 microlight filler to make things line up better.
I'm also working on a engine cowl, not sure if it's legal for IMPBA, but I'll have one anyway.
My make shift hatch built with scraps from the kit with the rear hatch in the background ready to get faired.
The engine and stuffing tube are glassed in place. The instructions say to heat the tube to bend it, I put the shaft
in the tube so the tube is sturdy and doesn't get kinked. No need for heat.
The holes filled with epoxy, this was done by setting the boat on it's nose.
Above is how I mounted the radio box. It was done by glueing two strips to the hull and two on the sides of the radio
box. The hull strips were overdrilled and filled with epoxy and then inserting the hex bolts. When it cures you have a strong
tread!
|
